Bộ chuyển đổi RS-232/485/422 sang CAN ICP DAS tM-7530A CR
Features
- Compatible with CAN specification 2.0A and 2.0B
- Fully compatible with ISO 11898-2 standard
- Support various CAN baud rate from 10K bps to 1M bps
- Support user-defined CAN baud rate
- Support various UART baud rate from 110 bps to 230400 bps
- Build-in selectable 120 Ω terminal resistor
- Software configurable CAN and UART communication parameters
- Power, data flow, and error indicator for CAN and UART
- Watchdog inside
- Support pair connection mode
- Software buffer on CAN bus side and UART side
- Support user-defined end of characters on pair connection mode
- Support listen only mode
- Support time stamp response on UART side
Introduction
ICP DAS has provided a lot of UART/CAN product solutions which are widely recommended in the market. These UART/CAN converters can help users to implement the communication between UART and CAN network. In order to cater for costing requirement, we provide a new solution of UART /CAN converter-tM-7530A. The tM-7530A is a tiny UART/CAN converter to fit narrower environment as a result of its small size. It has isolation on power side and on CAN bus side and its performance is faster than other UART/CAN module. The function of tM-7530A can full compatibly with I-7530 and I-7530T. In additional, it provides new function such as listen only. User can use this function to listen CAN bus messages and error detection. According to above features, tM-7530A is an economical and practical UART/CAN converter solution.
Moreover, we expand the functionalities of tM-7530A for some special application. In pair connection mode, tM-7530A can be used to connect PC with other UART devices at the same time. The application architecture may be as follows.
